INVT Inverter Goodrive GD35-2R2G-4-H1 Manual

The INVT Goodrive GD35-2R2G-4-H1 is a high-performance inverter designed for various applications, providing reliable control and efficiency in power conversion. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting for optimal use of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: advanced vector control, built-in PID control, multiple communication protocols, and a user-friendly interface for easy operation.

Feature	Description
Advanced Vector Control	Provides precise speed and torque control for various applications.
Built-in PID Control	Allows for automatic control of temperature, pressure, and flow.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.
User-Friendly Interface	Intuitive display for easy navigation and settings adjustment.
Compact Design	Space-saving design for easy installation in various environments.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding to prevent electrical hazards.
Connect output terminals to the motor or load.

WARNING! Always disconnect power before installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and acceleration/deceleration times.
Save the configuration and perform a test run.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Input Voltage: 220V AC.
Output Voltage: 0-220V AC.
Power Rating: 2.2 kW.
Control Method: Vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access the inverter settings through the control panel. Key controls include:

Display: Shows operational status and parameters.

Buttons: Navigate through menus and adjust settings.

Indicators: LED indicators for power, fault, and operational status.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor or load to the output terminals.
Connect the control signals as per the wiring diagram.

Tip: Double-check all connections to prevent damage.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the main switch.
Select the desired operating mode from the control panel.
Monitor the display for operational parameters.
Adjust settings as necessary during operation.

WARNING! Do not operate the inverter outside of specified limits.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Keep the inverter clean and free from dust.
Check connections periodically for wear or damage.
Ensure proper ventilation around the inverter.

CAUTION! Disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the official documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Error code displayed	Fault in operation	Refer to the error code section in the manual.
Motor not running	Incorrect wiring	Verify connections and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the settings menu if necessary.

Support: For assistance, contact INVT support or visit the official website.