INVT Inverter Goodrive GD35-315G-4-H1 Manual

The INVT Goodrive GD35-315G-4-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and robust protection mechanisms. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, multiple protection features, user-friendly interface, and compact design.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Robust Protection	Over-voltage, under-voltage, over-current, and thermal protection.
User-Friendly Interface	Intuitive display and controls for easy operation.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the output to the motor or load.

WARNING! Ensure proper ventilation and avoid exposure to moisture.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the appropriate motor parameters.
Set the operational mode (e.g., V/F control, vector control).
Adjust parameters for acceleration and deceleration.
Save settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 380V-480V AC.
Output Power: 315 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Communication: Modbus, CANopen.

Controls and Settings

Access the inverter settings through the user interface. Key controls include:

Display: Shows operational status and error messages.

Buttons: Navigate through menus and adjust settings.

Parameters include motor settings, operational modes, and protection settings.

Connecting Devices

Ensure proper connections for optimal performance:

Turn off power before making connections.
Connect input power supply to the designated terminals.
Connect output terminals to the motor.
Verify all connections before powering on.

Tip: Use appropriate gauge wiring for all connections.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter.
Select the desired operational mode.
Start the motor using the control interface.
Monitor performance and make adjustments as necessary.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring regularly.
Clean the inverter housing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
Error code displayed	Fault condition	Refer to the error code section in the manual.
Motor not running	Incorrect settings	Verify motor parameters and operational mode.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if available.