INVT Inverter Goodrive GD35-315G-4-S1 Manual

The INVT Goodrive GD35-315G-4-S1 is a high-performance inverter designed for various applications, including industrial automation, HVAC systems, and renewable energy systems. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms to ensure reliable operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly display, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Multiple Control Modes	Supports V/F control, vector control, and torque control.
Built-in Protection	Overvoltage, undervoltage, overcurrent, and thermal protection.
User Interface	Intuitive display for easy monitoring and configuration.
Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure proper grounding of the inverter.

WARNING! Ensure all power is disconnected before installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the control mode according to your application.
Adjust the acceleration and deceleration times.
Save the settings and perform a test run.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Input Voltage: 380V AC.
Output Power: 315 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 45 kg.

Controls and Settings

Access settings via the user interface. Key controls include:

Display: Shows operational status and settings.

Buttons: Start, stop, and navigate through menus.

Adjust parameters such as frequency, voltage, and current limits.

Connecting Devices

Follow these steps to connect external devices:

Ensure the inverter is powered off before making connections.
Connect the motor to the output terminals.
Connect any control devices to the appropriate input terminals.
Verify all connections before powering on the inverter.

Tip: Use shielded cables for signal connections to minimize interference.

Operating the Inverter

To operate the inverter:

Press the start button to initiate operation.
Monitor the display for operational status.
Adjust settings as necessary during operation.
Press stop to halt operation safely.

WARNING! Do not operate the inverter without proper load connected.

Accessibility Features

The inverter includes features for ease of use, including a clear display and intuitive controls for all users.

Care & Cleaning

Keep the inverter clean and free from dust. Use a dry cloth for cleaning.

CAUTION! Do not use liquids or aerosols for cleaning.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Error code displayed	Fault condition	Refer to the manual for error code definitions.
No output voltage	Load disconnected	Ensure load is connected properly.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.