INVT Inverter Goodrive GD35-315G-6-D1 Manual

The INVT Goodrive GD35-315G-6-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high reliability, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple communication protocols, and robust protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Multiple Control Modes	Supports V/f control, vector control, and servo control.
Built-in Protection	Over-voltage, under-voltage, over-current, and over-temperature protection.
User Interface	Easy-to-use keypad and LCD display for monitoring and control.
Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.

Installation

Carefully unpack the inverter and inspect for any damage. Mount the inverter in a well-ventilated area.

Connect the input power supply: Ensure correct voltage and phase.
Connect the output to the motor: Follow wiring diagrams provided.
Ground the inverter: Proper grounding is essential for safety.
Power on the inverter: Check for any error codes on the display.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Set the motor parameters: Input motor specifications for optimal performance.
Configure control mode: Select the desired control method based on application.
Adjust protection settings: Set thresholds for over-voltage, over-current, etc.
Save settings: Ensure all configurations are saved before operation.

CAUTION! Double-check all settings to avoid damage to the motor or inverter.

Specifications

Model: GD35-315G-6-D1.
Input Voltage: 380V-480V AC.
Output Power: 315 kW.
Control Mode: V/f control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the keypad or through communication protocols. The LCD display provides real-time feedback on inverter status.

Keypad Functions: Start, Stop, Parameter settings, and Monitoring.

Adjustable parameters include frequency, acceleration/deceleration times, and motor settings.

Connecting Devices

Ensure the inverter is powered off before making any connections.

Connect the motor to the inverter output terminals.
Connect the control panel if applicable.
Verify all connections are secure and correct.

Tip: Use appropriate cables and connectors to ensure reliable operation.

Operating the Inverter

To operate the inverter, ensure all settings are configured correctly. Use the keypad to start and stop the motor.

Press the START button to begin operation.
Monitor the display for any error messages.
Adjust speed and torque as necessary using the keypad.
Press STOP to halt operation safely.

WARNING! Do not exceed the rated parameters to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance and longevity of the inverter.

Inspect connections and wiring periodically.
Clean the inverter housing to prevent dust accumulation.
Check for any signs of wear or damage.
Update firmware as necessary for improved functionality.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the manufacturer's documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Motor not running smoothly	Incorrect settings	Verify motor parameters and control mode.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the manual if necessary.

Service: Contact INVT support for further assistance.