INVT Inverter Goodrive GD35-315G-6-H1 Manual

The INVT Goodrive GD35-315G-6-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust design, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and customizable settings for various applications.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols for easy integration.
Customizable Settings	Flexible configuration options to meet specific application needs.
Built-in Protection	Over-voltage, under-voltage, and over-temperature protection features.

Installation

Ensure proper installation to guarantee optimal performance. Follow the guidelines below:

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the output to the motor or load as specified.

WARNING! Ensure power is off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the operational limits and safety parameters.
Test the system to ensure proper functionality.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Input Voltage: 380-480V AC.
Output Power: 315 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Weight: 50 kg.

Controls and Settings

The inverter features an intuitive control panel for easy operation.

Control Panel: Start/Stop, Speed Control, Parameter Settings, Fault Display.

Settings can be adjusted through the control panel or via communication protocols.

Connecting Devices

Follow these steps to connect external devices:

Ensure the inverter is powered off before making connections.
Connect the control signals to the appropriate terminals.
Verify all connections before powering on the inverter.

Tip: Use shielded cables for signal connections to minimize interference.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the control panel.
Select the desired operational mode.
Monitor the display for any fault indications.
Adjust speed and other parameters as needed.

WARNING! Do not operate the inverter beyond its rated specifications.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Motor not running	Incorrect settings	Verify motor parameters and settings.

Reset: Use the reset function in the control panel if necessary.

Service: For support, contact INVT customer service.