INVT Inverter Goodrive GD35-350G-6-D1 Manual

The INVT Goodrive GD35-350G-6-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high reliability, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, user-friendly interface, multiple communication protocols, and robust protection features.

Feature	Description
Control Algorithms	Advanced algorithms for precise motor control
Communication Protocols	Supports Modbus, CANopen, and more
Protection Features	Over-voltage, under-voltage, over-current protection
User Interface	Intuitive display for easy operation
Compact Design	Space-saving design for easy installation

Installation

Unpack and inspect the inverter. Ensure proper ventilation during installation.

Mount the inverter securely on a stable surface.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure the inverter is installed in a dry, well-ventilated area to prevent overheating.

First-Time Setup

Power on the inverter; follow the on-screen prompts for initial configuration.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure communication settings if applicable.
Save the settings and exit the setup menu.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 380V AC.
Output Power: 350W.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Dimensions: Compact design for easy installation.

Controls and Settings

Access settings via the user interface. Key controls include power, frequency adjustment, and parameter settings.

Display: Shows operational status and error codes.

Settings: Adjust motor parameters, control mode, and communication settings.

Connecting Devices

Connect the inverter to the motor and power supply as per the wiring diagram.

Ensure all devices are powered off before making connections.
Match cables to the corresponding terminals.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

Follow the operational guidelines for efficient use of the inverter.

Start the inverter using the power button.
Adjust the frequency as needed for the application.
Monitor the operational status on the display.
Stop the inverter safely when not in use.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections periodically for wear and tear.
Clean the inverter casing to prevent dust buildup.
Inspect cooling fans for proper operation.
Replace any damaged components immediately.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and supply voltage.
Error code displayed	Faulty component	Refer to the error code list in the manual.
Motor not running	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: For assistance, contact INVT support.