INVT Inverter Goodrive GD35-400G-6-D1 Manual

The INVT Goodrive GD35-400G-6-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a compact design, and robust protection mechanisms. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance
Compact Design	Space-saving installation with robust construction
Multiple Protocols	Supports Modbus, CANopen, and other communication protocols
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection
User Interface	Intuitive display for easy operation and monitoring

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding of the inverter.
Connect the output to the motor or load.

WARNING! Ensure all power is disconnected before installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operational parameters such as frequency and voltage.
Configure communication settings if applicable.
Save settings and perform a test run.

CAUTION! Double-check all connections before powering on.

Specifications

Input Voltage: 380V-480V AC.
Output Voltage: 0-480V AC.
Power Range: Up to 35kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access settings via the user interface or remote control.

Display: Shows operational status, parameters, and error messages.

Settings include: Motor parameters, operational modes, and communication settings.

Connecting Devices

Ensure proper connections to avoid damage to the inverter and connected devices.

Turn off all power before making connections.
Use appropriate cables for input and output connections.
Follow the wiring diagram provided in the manual.

Tip: Label all connections for easier troubleshooting.

Operating the Inverter

Follow the operational guidelines for optimal performance.

Start the inverter using the power button.
Monitor the display for any error messages.
Adjust parameters as needed during operation.
Stop the inverter safely when not in use.

WARNING! Do not operate the inverter outside of specified parameters.

Maintenance

Regular maintenance is essential for longevity and performance.

Check connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.
Update firmware as necessary.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	No power supply	Check input power connections.
Error code displayed	Fault condition	Refer to error code list in the manual.
Overheating	Blocked ventilation	Ensure proper airflow around the inverter.
Output voltage unstable	Incorrect settings	Verify output settings and load conditions.

Reset: Follow the reset procedure in the manual if necessary.

Support: For assistance, contact INVT support or visit the official website.