INVT Inverter Goodrive GD35-400G-6-H1 Manual

The INVT Goodrive GD35-400G-6-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and robust protection mechanisms. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Compact Design	Space-saving design suitable for various installations.
Multiple Control Modes	Supports V/F control, vector control, and torque control.
Built-in Protection	Over-voltage, under-voltage, over-current, and thermal protection.
Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding to prevent electrical hazards.
Connect the output to the motor or load.

WARNING! Follow all safety guidelines during installation to avoid injury or damage.

First-Time Setup

Power on the inverter and configure the basic settings.

Set the motor parameters in the inverter's menu.
Adjust the control mode according to the application.
Test the operation with no load before connecting to the actual load.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Input Voltage: 3-phase 380V-480V AC.
Output Voltage: 3-phase 0-400V AC.
Power Range: Up to 35kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access the inverter settings through the user-friendly interface.

Control Panel: Start/Stop, Speed Control, Parameter Settings.

Adjust settings for acceleration, deceleration, and motor parameters as needed.

Connecting Devices

Ensure proper connections for optimal performance.

Turn off the inverter and all connected devices before making connections.
Use appropriate cables for power and communication connections.
Verify all connections before powering on the inverter.

Tip: Double-check wiring against the provided diagrams.

Operating the Inverter

Follow the operating procedures for safe and efficient use.

Power on the inverter and check the display for errors.
Set the desired speed and start the motor.
Monitor the operation and adjust settings as necessary.

WARNING! Do not exceed the rated parameters of the inverter.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections and tighten if necessary.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Overheating	Blocked ventilation	Ensure proper airflow around the inverter.
Motor not running	Incorrect settings	Verify motor parameters and control settings.

Reset: Follow the reset procedure in the manual if necessary.

Service: Contact INVT support for assistance.