INVT Inverter Goodrive GD35-500G-6-H1 Manual

The INVT Goodrive GD35-500G-6-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and a user-friendly interface. This manual provides essential information regarding safety, installation, setup, operation, and troubleshooting of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and customizable parameters for various applications.

Feature	Description
High Efficiency	Ensures optimal performance and energy savings.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports MODBUS, CANopen, and other protocols for integration.
Customizable Parameters	Allows users to adjust settings for specific applications.
Robust Protection	Over-voltage, under-voltage, and over-current protection mechanisms.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure proper grounding of the inverter.
Connect the output to the motor or load.

WARNING! Ensure all power is disconnected before installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the operational mode (e.g., V/F control, vector control).
Adjust protection settings as necessary.
Save the configuration and test the operation.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Input Voltage: 380V-480V AC.
Output Power: 500W.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Dimensions: 200mm x 150mm x 100mm.

Controls and Settings

The inverter features a user-friendly interface with an LCD display for easy navigation.

Control Panel: Start/Stop, Speed Control, Parameter Settings, Fault Reset.

Access advanced settings via the menu for fine-tuning performance.

Connecting Devices

Ensure proper connections to avoid damage to the inverter and connected devices.

Turn off the inverter before making connections.
Connect the motor leads to the output terminals.
Connect the control signals if applicable.
Double-check all connections before powering on.

Tip: Use appropriate wire gauges for the current ratings.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter.
Select the desired operational mode.
Start the motor using the control panel.
Monitor the performance via the display.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections and tighten if necessary.
Inspect for dust and clean the inverter casing.
Ensure proper ventilation around the inverter.
Test functionality periodically.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the documentation provided.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	No input power	Check power supply connections.
Overcurrent fault	Load exceeds rating	Reduce load or check for short circuits.
Inconsistent speed	Incorrect parameter settings	Review and adjust settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: For support, contact INVT customer service.