INVT Inverter Goodrive GD35-560G-6-C1 Manual

The INVT Goodrive GD35-560G-6-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple protection features, and advanced control algorithms.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Multiple Protection	Over-voltage, under-voltage, over-current, and thermal protection.
User Interface	Intuitive display for easy monitoring and control.
Communication Protocols	Supports Modbus and other industrial protocols.
Compact Design	Space-saving design for easy installation.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure all connections are secure and insulated.
Connect the output to the load.

WARNING! Ensure the inverter is properly grounded to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the appropriate operating mode.
Set the output frequency and voltage as required.
Configure communication settings if applicable.
Save the settings and restart the inverter.

CAUTION! Double-check all settings before operation.

Specifications

Input Voltage: 380V AC.
Output Power: 560G.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 15 kg.

Controls and Settings

Access settings via the user interface. Key controls include:

Display: Shows operational status and settings.

Buttons: Navigate through menus and adjust settings.

Indicators: LED indicators for power, fault, and operational status.

Connecting Devices

Ensure all devices are compatible with the inverter.

Turn off all devices before connecting.
Match cables to the correct ports.
Power on the inverter and connected devices.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter.
Select the desired operating mode.
Monitor the output parameters on the display.
Adjust settings as necessary during operation.

WARNING! Do not exceed the rated output specifications.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections and tighten if necessary.
Clean the inverter casing to prevent dust accumulation.
Inspect for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, visit the official INVT website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections.
Error code displayed	Fault condition	Refer to the error code section in the manual.
Output voltage unstable	Load issues	Check connected load specifications.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.

Reset: Follow the reset procedure in the manual if necessary.

Support: For assistance, contact INVT support.