INVT Inverter Goodrive GD35-560G-6-D1 Manual

The INVT Goodrive GD35-560G-6-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust design, and a user-friendly interface, making it suitable for driving AC motors in a wide range of environments. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple communication protocols, built-in protection features, and customizable settings.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
User Interface	Intuitive controls for easy operation and monitoring.
Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.
Customizable Settings	Allows for tailored configurations to meet specific application needs.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely in a well-ventilated area.
Connect power supply according to the wiring diagram provided.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Follow all safety guidelines to prevent electrical hazards.

First-Time Setup

Configure the inverter settings for optimal performance.

Power on the inverter and access the setup menu.
Select the motor type and parameters.
Set the operational limits and safety features.
Save the settings and exit the setup menu.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 380V-480V AC.
Output Power: 560G.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 15 kg.

Controls and Settings

Access the inverter settings via the control panel.

Control Panel: Power button, display screen, navigation buttons, and parameter settings.

Settings include: Motor parameters, operational limits, and communication settings.

Connecting Devices

Follow these steps to connect external devices.

Ensure the inverter is powered off before making connections.
Connect the motor to the inverter output terminals.
Connect any external control devices as per the wiring diagram.
Power on the inverter and test the connections.

Tip: Double-check all connections to avoid damage.

Operating the Inverter

Learn how to operate the inverter effectively.

Start the inverter using the power button.
Select the desired operational mode.
Monitor the display for operational status and parameters.
Adjust settings as necessary during operation.

WARNING! Do not operate the inverter outside specified limits.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring regularly.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Perform software updates as needed.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Erratic operation	Incorrect settings	Review and adjust operational parameters.
No output to motor	Connection issue	Check motor connections and wiring.
Fault code displayed	Internal error	Refer to the manual for fault code definitions.

Reset: Use the reset function in the menu if available.

Service: Contact support for further assistance.