INVT Inverter Goodrive GD35-5R5G-4-D1 Manual

The INVT Goodrive GD35-5R5G-4-D1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced vector control technology, ensuring precise speed and torque control. The inverter supports multiple communication protocols, making it suitable for integration into various automation systems. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced vector control, multiple communication protocols, user-friendly interface, built-in protection features, and compact design.

Feature	Description
Vector Control	Ensures precise speed and torque control for various applications.
Communication Protocols	Supports Modbus, CANopen, and other protocols for easy integration.
User Interface	Intuitive display for easy monitoring and configuration.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.
Compact Design	Space-saving design suitable for various installation environments.

Installation

Carefully unpack the inverter and inspect for any damage. Follow the steps below for proper installation.

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the motor to the inverter output terminals.
Ensure all connections are secure before powering on the inverter.

WARNING! Ensure proper grounding and follow all safety precautions during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure basic settings.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and acceleration/deceleration times.
Configure communication settings if applicable.
Save the settings and exit the setup menu.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 380V-480V AC.
Output Voltage: 0-480V AC.
Power Range: Up to 5.5 kW.
Control Method: Vector control and V/f control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

The inverter features a user-friendly interface with a digital display for monitoring and configuration.

Control Panel: Start/Stop, Forward/Reverse, Parameter settings, and Fault display.

Settings include motor parameters, acceleration/deceleration times, and communication settings.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the input power supply according to the wiring diagram.
Connect any additional control devices as needed.

Tip: Double-check all connections before powering on the inverter.

Operating the Inverter

To operate the inverter, follow these steps:

Press the Start button to initiate operation.
Monitor the display for any fault indications.
Adjust speed and torque settings as required during operation.
Press the Stop button to halt operation safely.

WARNING! Always follow safety protocols when operating the inverter.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing and ensure ventilation is not obstructed.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
No output to motor	Incorrect wiring	Verify motor connections and parameters.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault indication on display	Internal error	Reset the inverter and check for issues.

Service: For support, contact INVT customer service.