INVT Inverter Goodrive GD35-5R5G-4-H2 Manual

The INVT Goodrive GD35-5R5G-4-H2 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a compact design, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Compact Design	Space-saving design suitable for various installations.
Multiple Protocols	Supports Modbus, CANopen, and other communication protocols.
Protection Features	Overvoltage, undervoltage, overcurrent, and thermal protection.
User Interface	Intuitive display for easy monitoring and control.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load as specified.
Ensure all connections are secure before powering on.

WARNING! Ensure the inverter is properly grounded to prevent electrical shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Adjust the frequency and voltage settings as required.
Save the configuration and exit the setup menu.

CAUTION! Double-check all settings before operating the inverter.

Specifications

Input Voltage: 380-480V AC.
Output Power: 5.5 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Weight: 12 kg.

Controls and Settings

The inverter features a user-friendly interface with a digital display for monitoring and control.

Control Panel: Start/Stop, Speed Control, Fault Reset, and Parameter Settings.

Access advanced settings through the menu for fine-tuning performance.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor leads to the inverter output terminals.
Connect the control signals as per the wiring diagram.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter, follow these steps:

Press the Start button to power on the inverter.
Adjust the speed using the control panel.
Monitor the display for operational status and any faults.
Press Stop to turn off the inverter safely.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections and tighten if necessary.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.
Schedule periodic inspections by qualified personnel.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided with the inverter.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
Overheating	Insufficient ventilation	Ensure adequate airflow around the inverter.
Fault code displayed	Internal error	Refer to the fault code list and reset the inverter.
Motor not running	Incorrect wiring	Verify motor connections and settings.

Reset: Use the reset function in the menu if available.

Service: For support, contact INVT customer service.