INVT Inverter Goodrive GD35-5R5G-4-S1 Manual

The INVT Goodrive GD35-5R5G-4-S1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust design, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple protection features, and communication options.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Multiple Protection	Over-voltage, under-voltage, over-current protections.
User Interface	Easy-to-read display and intuitive controls.
Communication Options	Supports various communication protocols for integration.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow the steps below:

Unpack the inverter and inspect for any damage.
Mount the inverter securely in a well-ventilated area.
Connect the input power supply and output load as per the wiring diagram.
Ensure all connections are tight and secure.

WARNING! Ensure the inverter is installed by qualified personnel to avoid hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

Select the appropriate operating mode.
Set the parameters according to your application requirements.
Test the output to ensure proper functionality.

CAUTION! Double-check all settings before operating the inverter.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-400V AC.
Power Rating: 5.5 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the user interface. Key controls include:

Display: Shows operational status and parameters.

Buttons: Navigate through menus and adjust settings.

Common settings include frequency, acceleration, and deceleration parameters.

Connecting Devices

Ensure all devices are compatible with the inverter.

Turn off the inverter before connecting devices.
Follow the wiring diagram for correct connections.
Verify all connections before powering on.

Tip: Use appropriate cables to prevent signal loss.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the main switch.
Select the desired operating mode.
Monitor the output and adjust settings as necessary.

WARNING! Do not exceed the rated load to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Output voltage unstable	Load issues	Check connected load and settings.
Fault code displayed	Internal error	Refer to the fault code section in the manual.

Reset: Follow the reset procedure in the user interface if necessary.

Service: Contact INVT support for further assistance.