INVT Inverter Goodrive GD35-7R5G-4-H2 Manual

The INVT Goodrive GD35-7R5G-4-H2 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and robust protection mechanisms. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, multiple protection features, user-friendly interface, and compact design.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Robust Protection	Over-voltage, under-voltage, over-current, and thermal protection.
User-Friendly Interface	Intuitive display and controls for easy operation.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports MODBUS, CANopen, and other protocols for integration.

Installation

Carefully unpack the inverter and inspect for any damage. Follow these steps for proper installation:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are secure and power on the inverter.

WARNING! Ensure proper grounding and follow all safety guidelines during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Adjust the frequency and voltage settings as required.
Save the configuration and perform a test run.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 3-phase 380V-480V AC.
Output Voltage: 3-phase 0-480V AC.
Power Range: 0.75kW to 7.5kW.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

The inverter features a digital display for monitoring and adjusting settings. Key controls include:

Display: Shows operational status, fault codes, and parameter settings.

Buttons: Navigate through menus, adjust settings, and start/stop operation.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor leads to the output terminals.
Connect the control signals as per the wiring diagram.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the main switch.
Select the desired operating mode (e.g., speed control).
Start the motor using the start button.
Monitor the display for any fault indications.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of overheating or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided with the inverter.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Fault code displayed	Operational error	Refer to the manual for fault code definitions and solutions.
Motor not running	Incorrect settings	Check motor parameters and ensure correct configuration.

Reset: Follow the reset procedure in the manual if necessary.

Service: For support, contact INVT customer service.