INVT Inverter Goodrive350-19 Series Manual

The INVT Goodrive350-19 series inverter is designed for various industrial applications, providing reliable and efficient control of AC motors. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, high efficiency, built-in protection features, user-friendly interface, and multiple communication options.

Feature	Description
Compact Design	Space-saving design suitable for various installations
High Efficiency	Optimized for energy savings and reduced operational costs
Built-in Protection	Overvoltage, undervoltage, and overload protection
User-Friendly Interface	Intuitive control panel for easy operation
Communication Options	Supports various communication protocols for integration

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Connect the motor output terminals.
Ensure all connections are tight and secure.

WARNING! Ensure proper ventilation to avoid overheating.

First-Time Setup

Power on the inverter and follow the setup instructions on the display.

Select the motor type and parameters.
Set the operational frequency and acceleration/deceleration times.
Save the settings and test the motor operation.

CAUTION! Double-check all settings before starting the motor.

Specifications

Input Voltage: 220V/380V AC.
Output Voltage: Adjustable according to motor specifications.
Power Range: 0.75kW to 15kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the control panel. Key controls include:

Power button
Frequency adjustment
Direction control
Emergency stop

Connecting Devices

Follow these steps to connect external devices:

Ensure the inverter is powered off before making connections.
Connect the control signals from the PLC or external controller.
Verify all connections before powering on the inverter.

Tip: Use shielded cables for signal connections to reduce interference.

Operating the Inverter

To operate the inverter:

Power on the inverter.
Select the desired operation mode (manual or automatic).
Start the motor using the control panel.
Monitor the performance and adjust settings as necessary.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is crucial for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of overheating or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the documentation provided with the inverter.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
Motor does not start	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault code displayed	Internal error	Refer to the fault code list in the manual.

Reset: Follow the reset procedure in the manual if necessary.