INVT Inverter Goodrive350 Series Manual

The INVT Goodrive350 series inverter is designed for various applications including industrial automation, HVAC, and water treatment. It offers advanced control features, high performance, and energy efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, built-in protection features, user-friendly interface, and communication options.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
Built-in Protection	Over-voltage, under-voltage, over-current, and over-temperature protection.
User Interface	LCD display for easy monitoring and configuration.
Communication	Supports Modbus, CANopen, and other communication protocols.
Energy Efficiency	Optimized for low energy consumption and high efficiency.

Installation

Ensure proper installation to avoid damage. Follow the guidelines below.

Mount the inverter in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are secure and insulated.

WARNING! Ensure power is off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup instructions on the display.

Set the motor parameters: Enter motor rated voltage, current, and frequency.
Configure control mode: Select V/F, vector, or torque control based on application.
Adjust protection settings: Set limits for over-voltage, under-voltage, and over-current.
Save settings and restart the inverter.

CAUTION! Double-check all settings before operation.

Specifications

Input Voltage: 220V/380V AC.
Output Power: Up to 15kW.
Control Mode: V/F, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.
Communication: Modbus, CANopen.

Controls and Settings

Access settings via the LCD display. Use the keypad for navigation and adjustments.

Key Controls: Power, Start/Stop, Up/Down, Enter, Escape.

Settings include motor parameters, control mode, and protection limits.

Connecting Devices

Ensure proper connections to avoid damage to the inverter and connected devices.

Turn off the inverter before connecting devices.
Match cables to the appropriate terminals.
Verify connections before powering on.

Tip: Use shielded cables for communication to reduce interference.

Operating the Inverter

Follow the operating instructions for optimal performance.

Press the Power button to turn on the inverter.
Select the desired operating mode using the keypad.
Monitor the display for operational status and alarms.
Adjust settings as necessary during operation.

WARNING! Do not operate the inverter outside of specified limits.

Maintenance

Regular maintenance is essential for longevity and performance.

Check connections and tighten as necessary.
Clean the inverter casing to prevent dust buildup.
Inspect cooling fans for proper operation.
Perform software updates as recommended.

Regulatory Information

Complies with international safety and electromagnetic compatibility standards. For support, visit www.invt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Verify output connections and load.
Over-temperature alarm	Insufficient ventilation	Ensure proper airflow around the inverter.
Communication failure	Wiring issue	Check communication cables and settings.

Reset: Use the reset function in the menu if available.

Service: Contact customer support for further assistance.