INVT Inverter Goodrive800 Pro Series Manual

The INVT Goodrive800 Pro Series is a high-performance inverter designed for various industrial applications. It offers advanced control features, high reliability, and energy efficiency. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, built-in safety features, user-friendly interface, and multiple communication protocols.

Feature	Description
Advanced Control	Supports vector control for precise motor control.
Built-in Safety	Overvoltage, undervoltage, and overcurrent protection.
User Interface	Intuitive LCD display for easy operation and monitoring.
Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.
Energy Efficiency	Optimized for low energy consumption and high performance.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the output to the motor or load.

WARNING! Ensure power is off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure communication settings if necessary.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before saving to prevent operational issues.

Specifications

Input Voltage: 220V AC.
Output Voltage: 0-220V AC.
Power Range: 0.75kW to 15kW.
Control Mode: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access the settings via the LCD display. Use the buttons to navigate through the menu options.

Key Controls: Power, Up/Down, Enter, Escape.

Settings include motor parameters, frequency settings, and communication options.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the control panel if applicable.
Verify all connections before powering on the inverter.

Tip: Use appropriate cables to avoid signal loss.

Operating the Inverter

Follow the operational guidelines for safe and efficient use.

Power on the inverter using the main switch.
Select the desired operating mode.
Monitor the display for operational status and alerts.
Adjust settings as needed during operation.

WARNING! Do not operate the inverter outside of specified parameters.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the documentation provided.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Inspect output connections and wiring.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Error codes displayed	Configuration issue	Refer to the manual for error code definitions.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.