INVT Inverter SP100-2R2-D4-6-S Manual

The INVT Inverter SP100-2R2-D4-6-S is a high-performance inverter designed for various applications, including solar energy systems, industrial automation, and more. It features advanced control algorithms, high efficiency, and robust protection mechanisms to ensure reliable operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, LCD display, multiple input/output options, built-in protections, and user-friendly interface.

FeatureDescription
High EfficiencyEnsures maximum energy conversion with minimal losses.
LCD DisplayProvides real-time monitoring of system status and performance.
Multiple Inputs/OutputsSupports various connection types for flexibility.
Built-in ProtectionsIncludes over-voltage, under-voltage, and short-circuit protection.
User-Friendly InterfaceEasy navigation through settings and configurations.

Installation

Carefully unpack the inverter and inspect for any damage. Install the inverter in a well-ventilated area.

  1. Mount the inverter securely on a wall or flat surface.
  2. Connect the input power source according to the wiring diagram.
  3. Ensure all connections are tight and secure.
  4. Plug the inverter into the AC power supply.

WARNING! Ensure proper ventilation to prevent overheating. Follow all safety guidelines during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

  1. Select the operating mode: Grid-tied or Off-grid.
  2. Set the output voltage and frequency as per your requirements.
  3. Configure any additional settings as needed.
  4. Save the settings and restart the inverter.

CAUTION! Double-check all settings before saving to ensure proper operation.

Specifications

Controls and Settings

Access the settings menu via the LCD display. Use the navigation buttons to adjust parameters.

Key Controls: Power button, Mode selection, Navigation buttons, Enter button.

Settings include: Output voltage, frequency, operating mode, and system diagnostics.

Connecting Devices

Ensure the inverter is powered off before making any connections.

  1. Connect the solar panels to the input terminals.
  2. Connect the load to the output terminals.
  3. Ensure all connections are secure and insulated.

Tip: Use appropriate gauge wiring for all connections to ensure safety and efficiency.

Operating the Inverter

To operate the inverter, ensure all connections are made and power is supplied.

  1. Press the power button to turn on the inverter.
  2. Monitor the LCD display for operational status.
  3. Adjust settings as necessary for optimal performance.

WARNING! Do not operate the inverter without proper connections and settings.

Accessibility Features

The inverter includes features for easy access and operation, including a clear LCD display and intuitive controls.

Care & Cleaning

Unplug the inverter before cleaning. Use a dry cloth to wipe the exterior.

CAUTION! Avoid using liquids or aerosols; keep away from moisture.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower supply issueCheck connections and power source.
OverheatingPoor ventilationEnsure adequate airflow around the inverter.
Low outputIncorrect settingsVerify output settings and load connections.
Faulty displayElectrical issueRestart the inverter; check for damage.

Reset: Refer to the user manual for reset procedures.

Service: Contact customer support for assistance.

INVT Inverter SP100-2R2-D4-6-S Manual © - All Rights Reserved 2026