INVT Inverter XG22KTR Manual

The INVT XG22KTR is a high-performance inverter designed for various applications, including solar energy systems and industrial automation. It features advanced technology for efficient power conversion, ensuring reliable operation and optimal energy management. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-efficiency power conversion, LCD display, multiple input/output options, built-in protection features, and remote monitoring capability.

Installation

Carefully unpack the inverter and inspect for any damage. Follow these steps for proper installation:

1. Choose a suitable location: Ensure adequate ventilation and avoid direct sunlight.
2. Mount the inverter securely: Use appropriate hardware for the surface.
3. Connect input sources: Follow wiring diagrams provided in the manual.
4. Connect output loads: Ensure compatibility with the inverter specifications.
5. Plug into AC power: Ensure all connections are secure before powering on.

WARNING! Inverter installation should be performed by qualified personnel to ensure safety and compliance with local regulations.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

1. Select input source: Use the LCD display to choose the appropriate input.
2. Set output parameters: Adjust voltage and frequency settings as needed.
3. Configure monitoring options: Set up remote access if applicable.
4. Test operation: Verify that the inverter operates correctly under load.

CAUTION! Ensure all settings are correct before connecting to the grid or load.

Specifications

• Power Rating: 22 kW.
• Input Voltage: 380V AC.
• Output Voltage: 220V AC.
• Efficiency: Up to 98%.
• Operating Temperature: -10°C to 50°C.
• Protection Class: IP65.
• Dimensions: 600 x 400 x 200 mm.
• Weight: 25 kg.

Controls and Settings

Access settings via the LCD display. Key controls include:

Power Button: Turns the inverter on/off.

Menu Navigation: Use arrow keys to navigate through settings.

Enter Button: Confirms selections and settings.

Adjust settings for performance optimization, including output voltage, frequency, and monitoring preferences.

Connecting Devices

Ensure all devices are compatible with the inverter specifications.

1. Turn off the inverter and devices before connecting.
2. Match cables to ports according to the wiring diagram.
3. Power on the inverter and devices after connections are secure.

Tip: Always double-check connections to prevent damage to devices.

Operating the Inverter

Follow these steps to operate the inverter:

1. Power on the inverter using the power button.
2. Select the desired input source from the menu.
3. Monitor performance via the LCD display or remote app.
4. Adjust settings as necessary for optimal operation.

WARNING! Do not exceed the rated capacity of the inverter.

Safety Features

The inverter is equipped with several safety features to protect both the device and connected equipment:

• Overvoltage protection
• Overcurrent protection
• Short-circuit protection
• Thermal protection
• Ground fault protection

Maintenance & Care

Regular maintenance is essential for optimal performance:

• Keep the inverter clean and free from dust.
• Inspect connections regularly for wear or damage.
• Check for software updates and apply as necessary.
• Ensure proper ventilation around the inverter.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided with the inverter.

Troubleshooting

Reset: Use the reset function in the menu if available.

Service: For support, contact INVT customer service.