INVT Inverter XG50-70KTR Manual

The INVT Inverter XG50-70KTR is a high-performance inverter designed for various applications, including solar energy systems and industrial power management. It features advanced technology for efficient energy conversion, ensuring optimal performance and reliability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, LCD display, multiple input/output options, built-in protection features, and remote monitoring capabilities.

FeatureDescription
High EfficiencyMaximizes energy conversion with minimal losses.
LCD DisplayProvides real-time monitoring of inverter status and performance.
Multiple Inputs/OutputsSupports various configurations for flexibility in installation.
Built-in ProtectionIncludes over-voltage, under-voltage, and short-circuit protection.
Remote MonitoringAllows for monitoring and control via mobile app or web interface.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

  1. Choose a suitable location: Ensure adequate ventilation and accessibility.
  2. Mount the inverter securely: Use appropriate hardware for the surface.
  3. Connect input sources: Follow wiring diagrams provided in the manual.
  4. Connect output loads: Ensure compatibility with the inverter specifications.
  5. Power on the inverter: Check for proper operation and indicators.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

  1. Select input source: Choose between solar, grid, or battery.
  2. Set output parameters: Adjust voltage and frequency settings as needed.
  3. Configure monitoring options: Set up alerts and notifications.
  4. Save settings: Confirm and save your configurations.

CAUTION! Ensure all settings are correct before operation.

Specifications

Controls and Settings

Access settings via the LCD display. Key controls include:

Power Button: Turns the inverter on/off.

Menu Navigation: Use arrow keys to navigate settings.

Enter Button: Confirms selections and settings.

Adjust parameters such as output voltage, frequency, and monitoring options through the menu.

Connecting Devices

Follow these steps to connect devices to the inverter:

  1. Turn off the inverter before connecting devices.
  2. Match cables to the appropriate ports (input/output).
  3. Ensure compatibility with the inverter specifications.
  4. Power on the inverter after connections are secure.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter:

  1. Ensure all connections are secure.
  2. Power on the inverter using the power button.
  3. Monitor the LCD display for operational status.
  4. Adjust settings as necessary for optimal performance.

WARNING! Do not operate the inverter in wet or damp conditions.

Maintenance and Care

Regular maintenance is essential for longevity:

CAUTION! Unplug the inverter before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the regulatory compliance section in the manual.

Troubleshooting

SymptomPossible CauseCorrective Action
Inverter not powering onPower supply issueCheck power connections and circuit breakers.
Low output voltageIncorrect settingsVerify output voltage settings in the menu.
OverheatingPoor ventilationEnsure adequate airflow around the inverter.
Faulty displayElectrical issueRestart the inverter; contact support if issue persists.

Reset: Use the reset option in the menu if available.

Service: For assistance, contact INVT support.

INVT Inverter XG50-70KTR Manual © - All Rights Reserved 2026