INVT Inverter XN5548 Manual

The INVT Inverter XN5548 is a high-performance inverter designed for various applications, including solar energy systems and backup power solutions. It features advanced technology for efficient power conversion, ensuring reliable operation and energy savings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, LCD display, multiple protection features, remote monitoring capability, and user-friendly interface.

Feature	Description
High Efficiency	Converts DC to AC with minimal energy loss
LCD Display	Provides real-time information on inverter status
Multiple Protections	Overload, short circuit, and over-temperature protection
Remote Monitoring	Allows users to monitor performance remotely
User-Friendly Interface	Easy to navigate settings and configurations

Installation

Carefully unpack the inverter and inspect for any damage. Install the inverter in a well-ventilated area.

Mount the inverter on a stable surface using appropriate hardware.
Connect the DC input from the battery or solar panel.
Connect the AC output to the electrical system.
Plug into AC power if applicable.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the input source: Choose between battery or solar.
Set output voltage: Adjust according to your electrical system.
Configure alarm settings: Set thresholds for alerts.
Save settings and exit the setup menu.

CAUTION! Ensure all settings are correct before operation.

Specifications

Input Voltage: 48V DC.
Output Voltage: 110V/220V AC (selectable).
Power Rating: 5500W continuous output.
Efficiency: Up to 93%.
Operating Temperature: -10°C to 50°C.
Dimensions: 400mm x 300mm x 150mm.
Weight: 10 kg.

Controls and Settings

Access settings via the LCD display. Use the buttons to navigate through the menu options.

Buttons: Power, Menu, Up/Down, Enter.

Settings include: Input source selection, output voltage adjustment, alarm settings, and system information.

Connecting Devices

Ensure the inverter is powered off before making any connections.

Connect the DC source to the inverter's input terminals.
Connect the AC load to the output terminals.
Double-check all connections for security.

Tip: Use appropriate gauge wiring to prevent overheating.

Operating the Inverter

To operate the inverter, ensure all connections are secure and power on the unit.

Monitor the LCD display for operational status.
Adjust settings as necessary for optimal performance.
Regularly check for any alarms or alerts.

WARNING! Do not exceed the rated power to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the inverter clean and free from dust.
Check connections periodically for wear or corrosion.
Ensure proper ventilation around the unit.

Regulatory Information

This inverter complies with relevant safety and performance standards. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No output	Power source issue	Check DC input connections and battery status.
Overload alarm	Exceeding power rating	Reduce load to within rated capacity.
LCD display not working	Power supply issue	Check power connections and reset the inverter.
Inverter overheating	Poor ventilation	Ensure adequate airflow around the unit.

Reset: Follow the reset procedure in the user manual if necessary.

Service: Contact customer support for further assistance.