INVT Inverter iMars BG2K2TL Manual

The INVT Inverter iMars BG2K2TL is a high-performance inverter designed for solar energy applications. It features advanced MPPT technology, high efficiency, and a user-friendly interface. This manual provides essential information regarding safety, installation, operation, and troubleshooting of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, built-in Wi-Fi monitoring, and multiple protection mechanisms.

FeatureDescription
MPPT TechnologyMaximizes energy harvest from solar panels
Wi-Fi MonitoringReal-time monitoring via mobile app
Compact DesignSpace-saving installation
Multiple ProtectionsOvervoltage, overcurrent, and thermal protection
LCD DisplayUser-friendly interface for easy operation

Installation

Ensure proper installation for optimal performance. Follow the steps below:

  1. Choose a suitable location: Ensure adequate ventilation and avoid direct sunlight.
  2. Mount the inverter securely: Use appropriate mounting hardware.
  3. Connect solar panels: Follow the wiring diagram provided.
  4. Connect to the grid: Ensure compliance with local regulations.
  5. Power on the inverter: Check for proper operation.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Follow these steps to set up your inverter for the first time:

  1. Power on the inverter and wait for the LCD display to initialize.
  2. Set the language preference in the settings menu.
  3. Configure the Wi-Fi settings for remote monitoring.
  4. Perform a system check to ensure all components are functioning.

CAUTION! Follow all safety guidelines during setup.

Specifications

Controls and Settings

Access settings through the LCD display. Key controls include:

Buttons: Power, Settings, and Navigation buttons for menu access.

Settings: Adjust parameters such as output voltage, frequency, and Wi-Fi settings.

Connecting Devices

Ensure proper connections for optimal performance:

  1. Connect solar panels to the designated input terminals.
  2. Connect to the grid using the output terminals.
  3. Ensure all connections are tight and secure.

Tip: Use appropriate gauge wiring to prevent voltage drop.

Operating the Inverter

To operate the inverter:

  1. Ensure the inverter is powered on.
  2. Monitor the LCD display for operational status.
  3. Adjust settings as necessary for optimal performance.

WARNING! Do not exceed the rated output power.

Maintenance

Regular maintenance is essential for longevity:

  1. Inspect connections regularly for wear and tear.
  2. Clean the inverter casing to prevent dust buildup.
  3. Check for any error codes on the LCD display.

Regulatory Information

This inverter complies with international safety standards and regulations. For more information, refer to the certification documents.

Troubleshooting

SymptomPossible CauseCorrective Action
No outputPower connection issueCheck all power connections and ensure the inverter is powered on.
LCD display not workingPower supply issueCheck the power supply and ensure it is functioning properly.
Error code displayedSystem faultRefer to the error code section in the manual for corrective actions.
OverheatingPoor ventilationEnsure the inverter is installed in a well-ventilated area.

Reset: Follow the reset procedure in the settings menu if necessary.

Service: For support, contact INVT customer service.

INVT Inverter iMars BG2K2TL Manual © - All Rights Reserved 2026